Products

Featured products

carbon steel plate

carbon steel plate

carbon steel coil

carbon steel coil

Carbon steel pipe

Carbon steel pipe

Square steel pipe

Square steel pipe

Galvanized steel sheet

Galvanized steel sheet

Galvanized steel Coil

Galvanized steel Coil

Galvanized steel pipe

Galvanized steel pipe

Galvanized steel wire

Galvanized steel wire

Rebar

H beam steel

Contact us

Address

Room 914, Tower B, Entrepreneurship Building, Liaocheng Economic and Technological Development Zone, Shandong Province

Email

admin@uborsteelgroup.com

Phone

+86-18865129663

Fax

Wire rods

Wire rod

Multi-type production adaptation: It can be applied to various models such as Morgan, Danieli, Pomini, and SMS, with performance and life better than the original equipment manufacturers, and can meet the needs of different production equipment1. High reference value of advanced technology: The development of low-temperature rolling technology for bars and wires provides a useful reference for further application of low-temperature rolling technology in domestic bar and wire production, which helps to optimize the production process
Plain bar

It is composed of iron and contains a certain proportion of carbon and other alloying elements such as manganese and silicon. These elements improve its mechanical properties and enable the steel bar to maintain relatively stable chemical properties under different environments.
Plain bars

The bond performance between steel bars and concrete has an important influence on the seismic performance of concrete structures. Although its maximum bond stress under repeated cyclic loading is less than that under monotonic loading, its bond performance can be effectively utilized through reasonable design of factors such as concrete grade and embedment length. Studies have shown that the compressive strength of concrete has a positive effect on the maximum bond stress, while the embedment length has a negative effect. Based on elastic analysis and test data fitting, a bond stress-slip model is also established, which can be used to calculate the bond stress-slip relationship under different loads.
Coarse round wire

From the perspective of foreign standard ASTMA752M-04 (2010), Coarse round wire has many highlights. This standard puts forward general requirements for alloy steel coarse round wire, covering chemical composition verification, and requires thermal analysis and product analysis to ensure that the percentage of chemical components such as carbon, manganese, phosphorus, sulfur, vanadium, titanium, nickel, chromium, molybdenum, copper, tungsten, aluminum and lead are within the specified range, which ensures the stability of the product's chemical composition and meets specific quality requirements.
Q235B/Q355B Wire rods

Q235B is a carbon structural steel with a tensile strength range of about 370-500MPa and a yield strength lower limit of 235MPa. It has good plasticity and toughness1. This allows it to withstand large deformations without breaking during processing, is easier to deform by cold bending, stamping, etc., can adapt to complex processing techniques, and is suitable for making special-shaped components.
HPB300/HRB400/HRB500 Wire rods

It is mainly composed of iron (Fe) and a small amount of carbon (C), manganese (Mn), sulfur (S), phosphorus (P) and other elements. Strength and elongation characteristics: The tensile strength is about 300MPa, which is a relatively low-strength steel bar, but the elongation is large, and the design strength value is generally 270N/mm². Easy to identify by appearance: As a hot-rolled round grade one steel bar, it is easy to identify at the construction site due to its round appearance.